Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner

Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner

Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner

Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner

  • Sturdy heavy duty stand with built in tip cleaner
  • Replaceable Soft Coiled Brass Tip Cleaner
  • Keeps tip temperature constant

Sturdy and heavy-duty metal soldering iron stand with Bakelite ring that holds the iron and protects the tip. The built in soft coiled brass tip cleaner reduces the potential to introduce contaminants to the tip. Cleans better than conventional sponges. No water is required. Keeps tip temperature constant to avoid tip shock.  Has 4 rubber feet to prevent stand from moving. Will accept soldering irons with diameter up to 24mm.

List Price: $ 24.41

Price: $ 7.60

Similar Posts
Cowhide Leather Welding Mask, Mokylor Comfortable Welding Hood Helmet Inner Outter Lens Glasses
Cowhide Leather Welding Mask, Mokylor Comfortable Welding Hood Helmet Inner Outter Lens Glasses
Cowhide Leather Welding Mask, Mokylor Comfortable Welding Hood Helmet Inner Outter Lens Glasses Material: cowhide split leather; 3 in 1...
IRONCAT 7000 Heat Resistant Split Cowhide Leather Welding Cape Sleeve, X-Large
IRONCAT 7000 Heat Resistant Split Cowhide Leather Welding Cape Sleeve, X-Large
IRONCAT 7000 Heat Resistant Split Cowhide Leather Welding Cape Sleeve, X-Large Heat resistant leather protects against spark and offers extended...
Forney 31210 E6011 Welding Rod, 1/8-Inch, 10-Pound
Forney 31210 E6011 Welding Rod, 1/8-Inch, 10-Pound
Forney 31210 E6011 Welding Rod, 1/8-Inch, 10-Pound The product is 10LB 1/8 6011 Weld Rod Easy to use All position...

3 Comments

  • MattJ says:
    10 of 10 people found the following review helpful
    3.0 out of 5 stars
    sucks until you fix it., August 2, 2015
    By 
    MattJ

    Verified Purchase(What’s this?)
    This review is from: Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner (Misc.)
    The plastic collar heats up and gives off a stinky plastic smell that can’t be healthy. I broke the collar off and drilled a hole through the metal sleeve and attached it to one of the holes in the stand. This got rid of the plastic smell and still let me use the stand. The makers should have used metal of some sort
    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  • Oregontrailmike says:
    7 of 7 people found the following review helpful
    4.0 out of 5 stars
    Good soldering iron holder for a nice price., January 1, 2016
    By 

    Verified Purchase(What’s this?)
    This review is from: Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner (Misc.)
    Replaces my old soldering iron holder.
    Great stability and quality.
    The only drawback is that there is no spray guard over the tip cleaner. Unlike the hakko tip cleaner this one sometimes sprays my workbench with tiny fragments of solder if I wipe a heavily tinned tip. As long as the holder is far enough away from your PCB this should be no problem.
    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  • Dan says:
    1 of 1 people found the following review helpful
    5.0 out of 5 stars
    Best Soldering Stand for the price, November 2, 2016
    By 
    Dan

    Verified Purchase(What’s this?)
    This review is from: Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner (Misc.)
    Excellent stand, Stand is heavy gaugemetal. Cup which holds metal coil is metal unlike others which are plastic. The iron receiver is heat resistant Bakelite with a metal tube attached. The stand back is perforated for heat dissipation. The Bakelite also is perforated for heat dissipation. The weight of the stand is plenty to keep it in place. A minor problem is the cup which is not a snug fit so perhaps a few wraps of teflon tape to fix that would be required. Great price for such a nice stand to complete my soldering station. Tiny rubber feet slide around on my counter top but when placed on a rubber mat it does not slide at all.

    To the reviewer who said a solder splash shield keeps solder off the bench. You do not slap this mesh like it was a sponge but instead simply poke the tip into the mesh. No splash, no mess. The sharp edges of the wire clean the tip with one or two pokes. One person I observed picked up the mesh and poked the tip into it while holding it. Works pretty good that way.

    After using this a while I have noticed that the metal tube that holds the iron gets pretty hot in fact it will melt plastic like solder spools and wick spools so do not allow those items to rest against the tube, It has still not smelled bad like one review. If I burn insulation I certainly get some foul odors but that is not the stands fault.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No